Some machines are much harder to start than they are to run. They start against pressure, a full belt or a heavy wheel, and they pull several times their running current for that first second. A converter sized only for the running horsepower can stall on them. Here are the factors we use for each kind of load.
| Equipment | Converter size | Notes |
|---|---|---|
| Air compressor (piston or screw) | HP × 2.5 | Lead with NL; NLA adds AutoLink restart after outages |
| Refrigeration, freezers, HVAC compressors | HP × 2.5 (or size from LRA) | NLA, so the converter is running before the compressor starts |
| Dust collector | HP × 2.5 | NLT if the motor is 460 V |
| Vacuum pump (CNC router table) | HP × 3, plus spindle HP | PLA for CNC routers |
| Waterjet | HP × 3 minimum | Often a DualZone; we check your service |
| Lathe, saw, pump, belt sander | HP × 2 | Standard factor for most motors |
| Trash compactor (5–15 HP) | HP × 1.5 | |
| Welder, heat press, battery charger | 1 input amp = 1 HP | Use full-load input amps, not output amps |
Example: a 10 HP compressor × 2.5 = 25, so a 25 HP converter (GP25NL, or GP25NLA with AutoLink).
HVAC example from the nameplate: a rooftop unit with a 195 LRA compressor works out to about a 7.5 HP motor. 7.5 × 2.5 = 18.75, so a 20 HP converter (GP20NLA).
When a motor starts, it pulls 4 to 7 times its running current until it's up to speed. On a hard-starting load that lasts longer. The idler motor in the converter has to supply that surge on the generated phase, so it needs extra size to hold the voltage up while the load comes up to speed.
If the converter comes out over 30 HP, call us before you order. The converter has to be smaller than the kVA of your utility transformer. If it isn't, a DualZone (two smaller idlers that start one after the other) handles the same load with a much smaller starting draw.
Not sure of the horsepower? Text a photo of the motor nameplate to 800-417-6568, or call the same number and we'll size it with you.
Call 800-417-6568 with your machine list. Every Phoenix converter comes with a lifetime warranty on the control panel; the idler motor carries a 3-year warranty from the motor maker.
Talk to a Phase Converter Engineer
📞 800-417-6568Free sizing help • Lifetime warranty • Made in USA • Mon–Fri 7AM–5PM MST