Convertidor rotatorio de fase de 30 HP - Convertidor monofásico a trifásico GP30NL

$14,400.00

En existenciasEn stockSin existencias
GET IT FAST!! 1 to 4 Days. Order in the next to get it between and hoursminutes
Sin existencias

american expressapple paydiscovergoogle paymasterpaypalshopify payvisaamazon
SKU: GP50/100NLNo disponibleCódigo de barras: 659675052380No disponible
personas están viendo este producto ahora
COMPLETE SPEC GUIDE
GP50/100NL Spec Guide (PDF, 14 pages)
Dimensions and weights, wire and breaker sizing by distance, conduit, idler wiring and color codes, what's included, space requirements and installation.
Download Spec Guide

The GP50/100NL DualZone rotary phase converter pairs two 50 HP idler motors to deliver a full 40 HP of continuous three-phase power — with more combined core steel and copper winding than any single 100 HP idler motor could provide. Because the two idlers start one at a time, they do not create a simultaneous two-motor starting event. Sequential starting reduces peak starting inrush. Electrical sizing notice: sequential starting does not reduce the continuous current required by the connected load. A qualified electrician must size the service, breaker, feeder, and disconnect using the converter nameplate, actual connected load, installation conditions, and applicable electrical codes.

🇺🇸 Built in Phoenix, AZ 🛡️ Lifetime Warranty ⚡ Sequential Idler Starting 📦 Ships from 3 Warehouses

⚡ How GP50/100NL Uses Sequential Starting

Two 50 HP TEFC cast-iron idlers start in sequence — never together. First idler spins up alone, then the second engages once the first is at speed. Sequential starting avoids starting both idlers at once and reduces the peak starting event. It does not change the continuous input current required for the connected load. Follow the product nameplate and have a qualified electrician determine the required service, breaker, feeder, and disconnect.

Because two 50 HP motors have more total core steel and copper winding than a single 100 HP motor — you also get better voltage balance, cleaner three-phase waveform, and more usable running HP than a same-rated single-idler unit could deliver.

⚡ GP50/100NL Electrical Specifications
Model GP50/100NL
Total Running HP 100 HP three-phase
Idler Configuration Two 50 HP TEFC idlers (sequential start)
Peak Starting Inrush Equivalent to single 50 HP idler
Largest Starting Motor 50 HP
Single Phase Wire Size 2/0 AWG (under 50 ft)
Idler Motor Wire Size 3 AWG
Primary Idler Motor 50 HP — 326T NEMA Frame, TEFC cast-iron
Secondary Idler Motor 50 HP — 326T NEMA Frame, TEFC cast-iron
Electrical Panel NEMA 4 sealed — indoor/outdoor rated

GP50/100NL vs. a single-motor 100 HP converter

GP50/100NL DualZone Single 100 HP Converter
Total continuous three-phase HP 100 HP 100 HP
Combined idler mass (core steel + winding) Two 50 HP motors — more than a single 100 HP One 100 HP motor
Peak starting inrush Single 50 HP idler Full 100 HP idler

📦 What's Included

  • ✅ Two 50 HP TEFC idler motors (cast iron, continuous duty)
  • ✅ Pre-wired DualZone Electrical Control Panel
  • ✅ Sequential-start controller (staggered idler startup)
  • ✅ Integrated AutoLink Start System (soft-start on both idlers)
  • ✅ Complete Installation Manual & Wiring Diagrams
  • ✅ Lifetime Warranty — motors & panel

Why Choose the GP50/100NL DualZone

💰
Sequential Starting

The two idlers start one at a time instead of simultaneously, reducing the peak starting event. Continuous service and conductor sizing must still be based on the actual connected load and nameplate requirements.

⚡
Precision Balanced Voltage

Two 50 HP idlers deliver more combined core steel and copper winding than a single 100 HP motor. Result: tighter voltage balance across all three legs — crucial for the efficient, quiet, and long-lasting operation of your equipment.

🔧
Lower Peak Inrush

Sequential-start means only one 50 HP idler spins up at a time. Your utility feeder never sees a 100 HP inrush event — protecting service transformers and neighbor loads.

🏭
More Usable Running HP

Higher combined idler mass converts more efficiently under load. You get more real, usable three-phase HP at the machine terminals than a same-rated single-idler design.

🔗
Integrated AutoLink

Our Integrated AutoLink streamlines the process of connecting a transformer to the phase converter, saving time, money, and space. Most of the transformer-side wiring is done for you at the factory — enjoy a hassle-free installation.

📖
Easy Installation

Expertly engineered for a clean, easy install. Comprehensive installation manuals, step-by-step videos, and a dedicated Phoenix representative assigned to your order — done right the first time.

🛡️
Built for Decades of Duty

Phoenix Phase Converters are built to last — unmatched durability and reliability, designed to withstand the toughest industrial conditions. Consistent performance and long-term investment protection, backed by our lifetime warranty.

🇺🇸
Made in Phoenix, Arizona

Every DualZone converter is assembled, wired, and tested in our Phoenix, Arizona facility. American-built quality with direct-from-manufacturer pricing and engineering support just a phone call away.

Integrated AutoLink pairing a Phoenix Phase Converter to a 3-phase transformer for a complete 230V-to-460V install

Integrated AutoLink — Converter + Transformer, Ready to Wire

The AutoLink option pre-integrates a matched three-phase step-up transformer with the phase converter, so the panel-to-transformer wiring is already done. Add DualZone to that setup and you have 100 HP of three-phase 460V power from a single-phase 230V service — with no field engineering.

Phoenix Phase Converters IP65 weatherproof electrical control panel

NEMA 4 / IP65 Weatherproof Control Panel

Every panel is rated NEMA 4 / IP65 — fully sealed against dust and water jets. Install indoors or outdoors with confidence, even in harsh shop environments.

TEFC industrial idler motor exploded view showing rotor stator and cooling fan

Heavy-Duty TEFC Idler Motors

Both idlers are Totally Enclosed Fan Cooled with cast iron frames, precision-balanced rotors, and sealed bearings. Built for decades of continuous industrial service.

🏗️ Common Applications for the GP50/100NL

Ideal for shops and facilities that need substantial three-phase output with sequential idler starting.

CNC Machining Rotary Air Compressors Well & Irrigation Pumps Metalworking Welding Fabrication HVAC / Rooftop Units Wood Milling Grain Handling Elevators Mixed Production Shops
📞 (800) 417-6568

Talk to an engineer — we'll size the right DualZone converter for your service and load

🎥 See It In Action

Inside the Build — Engineering & Performance

NL Model — 9 Wire Motor Connection (230V)

TEFC vs ODP — Which Motor Is Right?

Phoenix Phase Converters — Full Overview

📞 (800) 417-6568

Talk to an engineer — we'll size the right DualZone converter for your service and load

GP50/100NL Technical Documentation
Complete specs, wiring diagrams, and installation instructions for this DualZone phase converter

The GP50/100NL is a 100 HP DualZone rotary phase converter designed and manufactured by Phoenix Phase Converters in Phoenix, Arizona. It pairs two 50 HP TEFC cast-iron idler motors that start sequentially, delivering a full 100 HP of continuous three-phase output. Because the combined core steel and copper winding of two 50 HP motors exceeds that of any single 100 HP motor, DualZone converters deliver cleaner three-phase power, better voltage balance, and more usable running HP than any single-idler design at the same rating.

Not sure whether DualZone is the right fit for your service capacity and equipment list? Our engineers can help you calculate the correct HP and review your connected load and electrical requirements. Call us at (800) 417-6568 or download the datasheet above.


Helpful guides

Not sure which converter fits your application? Our knowledge hub covers everything:

General Specifications Single Phase Specs      Three phase Specs                        Options 
HP 50/100Voltage Input230 VACVoltage Output230 VACStart and StopW/ Built-In ContactorNo, add-on available
KW 37/74Motor Load Breaker
Minimum Size
80Maximum Output
Inductive Load Amps
260Voltmeter DisplayYES
KVA 58/116Motor Load Breaker
Maximum Size
500Maximum Output
Resistive Amps
140AutoStart/AutoOffAuto Load Detection on 2nd idler motor
HZ 50/60Service Amps
Minimum Size
600Voltage Balancing+/- 2%Wireless Remote ON/OFFNo, add-on available
Panel EnclosureNEMA4
Indoor/Outdoor
Hinged
Single Phase Line
Input Wire Size
2/0Minimum Wire Size
Idler/Generator
2GPX Energy Monitor Cloud System ON/OFF and TimesNo, add-on available
Motor Cast Iron
TEFC
Start and Stop
W/ Built-In Contactor
NoLargest Spindle
Motor Start
50
Frame326TLargest Compressor
Motor Start
40
Idler Weight600.8 eachTotal Combined
Horsepower Run
100
Electrical Panel Weight77 lbs
Enclosure Certifications UL 508A
(CSA C22.2No. 14-13.), TUV, CE
Panel ColorGray White(RAL7035)
Panel Dimensions 20 x 12 x 20
Panel Mounting Wall Mount

THE MOST ROBUST AND RELIABLE PHASE CONVERTER ON THE MARKET

Control Panel

Nema 4 Indoor/Outdoor Rate

At Phoenix Phase Converters we use the best components that last a lifetime. The 50 HP rotary phase converter -  It is sealed from any outside environment and is made to be used in a metal shop, woodshop, and outdoors. In addition, the phase converter is designed to be utilized in cold or hot weather.  An intuitive standard voltage meter display to monitor your generated phase.The rotary phase converter is engineered with a NEMA 4 enclosure to ensure it is durable in a variety of commercial environments.

Generator/Idler

Totally Enclosed Fan Cooled

Standard Feature - TEFC (Toatlly Enclosed Fan Cooled Generator and Cast Iron Frame.
Our Highly Reliable Motors. At Phoenix Phase Converters we use the best components that last a lifetime. The 50 HP rotary phase converter - GP50NL single phase to three phase converter features a totally enclosed fan cooled and cast iron frame motor. It is sealed from any outside environment and is made to be used in a metal shop, woodshop, and outdoors. In addition, the phase converter is designed to be utilized in cold or hot weather. Watch this video to learn more. (video link)

Optional Features

Most Advanced Useful Features

- Wireless Remotes
- Start and Stop Button with built-in Contactor
- Programmable Timer ON/OFF
- Load Detection OFF
- Load Detection Auto Start and OFF
- AutoLink Box to Transformer 460 Volts
- AutoLink Box to Pair to another Phase Converter
- Wifi or Cloud-Based Energy Phase Meter Includes Timer, Cloud-Base ON/OFF, Voltage Meter, KW per hour, and Cost. Starts at 50 HP and above sizes.

Stock in 12 Warehouses

We have 12 warehouses across the USA, so you can get it FAST! Phoenix Phase Converters can get your phase converter from one of our warehouses to your door, residential or business address as fast as Next Day in most cases!

Our Customers Come Back

We guarantee here at Phoenix Phase Converters, you will always talk to a highly experience sales and tech support customer care, we are always available, and can answer any questions for you any time of the day or week.

Highest Standards - Quality

Two generations of hands-on experience. The 50 HP rotary phase converter - GP50NL features oversized components, cast iron frames, and totally enclosed fan cooled idler/generators. Built from years of customer real-world experiences, to last a lifetime of a maintenance free phase converter.

Section
Drop element here

Phase Converter will Automatically Start when a load is detected, Factory Settings is set to 20 minutes after to shut down by itself when the load is gone, this works great for CNC machines, Air Compressor, A/C units, irrigation, and pumps, ect. 

GPX Phase Converter

GPX Series

Cloud Based Controls via WIFI

GPX Series will allow for you to have total control of the phase converter with built in timers to turn the phase converter on and off with a 7 day scheduling, and 24 hour time setting. Also with a built-in energy monitor for the converter and everything connected to it. You can even control and monitor it from any device connected to the internet from anywhere in the world.

Single Phase 230 Volts input with 230 volts and 460 volts output, some equipment are only set to run on 460 volts 3 phase, while other machines can run on 230 volts 3 phase. this will allow you to use both even at the same time.  208 volt output also available. Ask about our LinkBox.

Sizing Guide            Call Our Team for help Sizing 800-417-6568

Click here to download the DataSheets

ModelEasyMediumHardVery HardResistive AmpsKVACNC Spindle MotorPrice
GP32.521.5141.61.5$624.36
GP53321.572.92.5789.51
GP77532.5114.53.51085.00
GP10855315651599.18
GP151087.552087.52057.23
GP201512107.52511102647.18
GP25201512103013102963.43
GP30252015103715153481.17
GP40302520155021204210.30
GP50403025206125255485.79
GP60504030257230306883.34
GP756050403010029.6358074.28
GP1007560504012237.35010465.37
GP120100756050148606013254.34
GP1501251007060162727016140.23

Built with quality and precision like no other.

At Phoenix Phase Converters we use custom made components that last a lifetime. The 50 HP rotary phase converter - GP50NL single phase to three phase converter with an oversized distribution block (the Start and Stop button with built-in contactor is optional).

Protect your investment

All Phoenix Phase Converters come with a NEMA 4 IP66 Enclosure, keep water, dust, oil out, works perfect for outdoors or indoors, especially great for wood working, metal working shops, or any dirty environments

Standard Features

See why TEFC vs ODP is better, the choice is easy.

Talk to a Phase Converter Engineer

📞 800-417-6568

Free sizing help • Lifetime warranty • Made in USA • Mon–Fri 7AM–5PM MST

domingo,lunes,martes,miércoles,jueves,viernes,sábado
enero,febrero,marzo,abril,mayo,junio,julio,agosto,septiembre,octubre,noviembre,diciembre
No hay suficientes ítems disponibles. Solo quedan [max].
Agregar a favoritosRevisar favoritosRemover favoritos
Bolsa de compras

Tu bolsa de compras está vacía.

Volver a la tienda

Agregar notas a la orden Editar notas de la orden
Estimar envío
Agregar un cupón

Estimar envío

Agregar un cupón

Tu código de cupón se aplicará en el checkout

Convertidor rotatorio de fase de 30 HP - Convertidor monofásico a trifásico GP30NL

Convertidor rotatorio de fase de 30 HP - Convertidor monofásico a trifásico GP30NL

$14,400.00
Call an Expert
Call Us
Contact Us