How to Size a Phase Converter for a CNC Machine

Haas, Fanuc, Mazak, Okuma: the method is the same for every CNC mill, lathe and machining center. You only need one number from the machine: the main spindle horsepower.

The rule: main spindle horsepower × 2

Find the main spindle motor horsepower and multiply it by 2. Round up to the next converter size. You don't need to add the axis servos, coolant pump or chip conveyor; the doubling covers them. If the machine has a high-power spindle option, use that spindle's horsepower. If it has a second spindle that runs at the same time, add that one at 1×.

Example: a Haas Mini Mill has a 10 HP spindle. 10 × 2 = 20, so you need a 20 HP converter (GP20PLA).

Sizing chart for CNC machines

Main spindle Math Recommended (PLA) Basic option (NL)
3 HP 3 × 2 = 6 GP7PLA GP7NL
5 HP 5 × 2 = 10 GP10PLA GP10NL
7.5 HP 7.5 × 2 = 15 GP15PLA GP15NL
10 HP 10 × 2 = 20 GP20PLA GP20NL
15 HP 15 × 2 = 30 GP30PLA GP30NL
20 HP 20 × 2 = 40 GP40PLA GP40NL
25 HP 25 × 2 = 50 GP50PLA GP50NL
30 HP 30 × 2 = 60 GP60PLA GP60NL

Spindle over 30 HP? Call us. A 60 HP converter or larger needs enough building service (the converter has to be smaller than your utility transformer's kVA), and a DualZone often makes more sense.

Why we recommend the PLA for CNC

The PLA has a start/stop button with a built-in magnetic starter and voltage protection. After a power outage the converter and the CNC won't try to start at the same moment, and the machine is protected against low voltage and overloads. On an expensive CNC control, that protection is cheap insurance. The NL works too if you'd rather keep it simple.

Rotary, not digital

For CNC, use a rotary phase converter. Digital (VFD-style) converters turn AC into DC and back into AC, and that power isn't as clean for a CNC control. A rotary converter makes true three-phase power.

Running a CNC router with a vacuum table?

Vacuum pumps are harder to start. Size a router like this: vacuum pump HP × 3 + spindle HP. With two vacuum pumps: first pump × 3 + second pump + spindle. Example: a 5 HP vacuum and a 10 HP spindle: 5 × 3 + 10 = 25, so a 25 HP converter (GP25PLA).

Check before you buy

Some newer Haas machines can run on single-phase power without a converter. Tell us your model and we'll check.

Not sure of the horsepower? Text a photo of the motor nameplate to 800-417-6568, or call the same number and we'll size it with you.

Want us to check your sizing?

Call 800-417-6568 with your machine list. Every Phoenix converter comes with a lifetime warranty on the control panel; the idler motor carries a 3-year warranty from the motor maker.

Talk to a Phase Converter Engineer

📞 800-417-6568

Free sizing help • Lifetime warranty • Made in USA • Mon–Fri 7AM–5PM MST

domingo,lunes,martes,miércoles,jueves,viernes,sábado
enero,febrero,marzo,abril,mayo,junio,julio,agosto,septiembre,octubre,noviembre,diciembre
No hay suficientes ítems disponibles. Solo quedan [max].
Agregar a favoritosRevisar favoritosRemover favoritos
Bolsa de compras

Tu bolsa de compras está vacía.

Volver a la tienda

Agregar notas a la orden Editar notas de la orden
Estimar envío
Agregar un cupón

Estimar envío

Agregar un cupón

Tu código de cupón se aplicará en el checkout

Call an Expert
Call Us
Contact Us