The GP60NL rotary phase converter converts single-phase 230V power to three-phase 230V — giving you 60 HP of continuous capacity to power heavy industrial equipment. Built for large shops, production facilities, and commercial operations that need reliable single phase to three phase conversion for demanding three-phase loads.
| Model | GP60NL |
| Total Running HP | 60 HP |
| Largest Starting Motor | 30 HP |
| Service Size | 75 KVA (300A) |
| Breaker Size | 100 MIN – 300 MAX |
| Single Phase Wire Size | 3/0 AWG (under 50 ft) |
| Idler Motor Wire Size | 1 AWG |
| Idler Motor | 782 lbs — 17" × 17" × 28" |
| Electrical Panel | 80 lbs — 20" × 20" × 8" |
NL Model Wiring Diagram — single-phase 230V in, three-phase 230V out
📦 What's Included
- ✅ 60 HP Idler Motor (TEFC, continuous duty)
- ✅ Pre-wired Electrical Control Panel
- ✅ AutoLink Start System (soft-start built in)
- ✅ Complete Installation Manual & Wiring Diagrams
- ✅ Lifetime Warranty — motor & panel
Simple, Labeled Installation
Every terminal is clearly marked — T1 and T2 for your single-phase 230V input. No guessing, no electrician headaches. Connect your single-phase supply and you're running three-phase power.
Why the GP60NL Phase Converter
Clean, balanced three-phase power from your single-phase supply. Won't damage sensitive equipment or trip breakers under load.
One phase converter powers your entire shop — up to 60 HP of simultaneous three-phase load across all your equipment.
Thermal and magnetic protection safeguards your equipment. AutoLink start system prevents inrush damage on startup.
Continuous duty rated. TEFC motor handles 24/7 operation in demanding environments — dust, heat, and vibration.
IP65 Weatherproof Control Panel
Every panel is rated IP65 — fully sealed against dust and water jets. Install indoors or outdoors with confidence, even in harsh shop environments.
Heavy-Duty TEFC Idler Motor
Totally Enclosed Fan Cooled motor with cast iron frame, precision-balanced rotor, and sealed bearings. Built for decades of continuous industrial service.
🏗️ Common Applications for 60 HP Phase Converters
This rotary phase converter is commonly used to power three-phase equipment in shops, farms, and industrial facilities running on single-phase utility service.
GP60NL Technical Documentation
Complete specs, wiring diagrams, and installation instructions for this phase converter
🎥 See It In Action
Inside the Build — Engineering & Performance
NL Model — 9 Wire Motor Connection (230V)
TEFC vs ODP — Which Motor Is Right?
Phoenix Phase Converters — Full Overview
Talk to an engineer — we'll size the right phase converter for your exact setup
The GP60NL is a 60 HP rotary phase converter designed and manufactured by Phoenix Phase Converters in Phoenix, Arizona. This single phase to three phase converter provides reliable three-phase power from a standard 230V single-phase service, eliminating the need for expensive utility upgrades. Whether you're converting single phase to three phase for a hydraulic press shop, grain drying facility, or large-scale manufacturing operation, the GP60NL delivers clean, balanced output for the most demanding environments.
Not sure which phase converter size you need? Our engineers can help you calculate the right HP rating based on your equipment list, starting loads, and how many machines run simultaneously. Call us at (800) 417-6568 or use the product datasheet above to compare the GP60NL specifications to your requirements.
